|
We got this roof and deck update completed recently. Would like to give a big shout out to Albert and Tony with Arlinghaus Builders for their help with the break metal for the gable and soffit of this project. The other subcontractor did a great job on the roof, but never recovered enough from Thanksgiving dinner to show back up to finish...:)
Roof Details: - 18'-0" x 12'-0" with 1' overhang on 3 sides - 5:12 slope outside and 3:12 slope interior cathedral ceiling - (2) Double LVL beams bolted to notched 6x6 posts - Engineered scissor trusses for single span for cathedral ceiling - Valley installed at new roof to existing roof - 5/8 sheathing, Synthetic underlayment, 25 yr asphalt shingle (to match house) - Seamless gutters with downspout - 6x6 roof support post wrapped with recess panel - Primed and painted, to match house, cedar 1x trim - 1x4 pine T&G bead board finished ceiling - polyurethane coated - Exterior gable to be finished with matching house siding - All soffits finished with ventilated vinyl to match existing and aluminum brake metal - Inside Gable to be trimmed with 1x primed and painted cedar - All wiring supplied and ran to all cans and ceiling fan - (4) can lights with exterior lense - Ceiling fan box installed in middle of cathedral ceiling - ceiling fan provided by homeowners - Master Electrician to pull permit in state of KY which is licensed in KY For the most part this deck was still in good shape. So, all we did was change out some framing members to beef up the framing in order to support the roof load. Changed out some railing as well. If you would like some shade for the summer months, give us a call for an estimate. Comments are closed.
|
|
RSS Feed